- 1/4-inch plywood
- Felt report
- Material lath
- Basic gun
- 1/2-inch basics
- Metal snips
- Rock veneer (genuine or made)
- Mortar combine
- Mortar package or huge bucket
- Mason's hoe or any other stirring device
- Square trowel
- Pointed trowel
- Mortar bag
- Stiff brush
Time: 2 days for an 8x8-foot wall surface
Create A Solid Base
Securely connect a level of plywood to the wall surface or hearth surround. Basic felt report within the plywood, and then sheets of material lath above the felt report. Lath perforations should slant down as well as in toward the wall surface, not-out.
Utilize Mortar to Wall
Plan your stone structure. Arrange the rocks before you're pleased with the fit and arrangement. When you determine your rock design, blend the mortar. Starting in a diminished place, trowel a coat of mortar on the lath, leaving no lath exposed. Work in 3x3 foot sections.
Apply Mortar to Rock
Back-butter the rocks one at a time with a pointed trowel. Don't worry about applying a lot of mortar; the extra will fit away and fill the joints amongst the stones.
Press Stones in position
Start in the lowest spot of this wall or fireplace surround and operate in horizontal levels. Drive each back-buttered rock in to the mortar and hold for 30 seconds. Prop greater or more substantial stones in position with a 1x4 board.
Look At Your Work
Resume laying stone rows just as, after your predetermined rock arrangement. Utilize a mortar bag to fill any broad joints or deep pouches with mortar. Following the mortar establishes slightly, pull extra mortar with a stiff brush. Periodically use an amount to check that the design is around horizontal. Allow mortar treatment according to the producer's instructions.
Make Effortless Corners
Most stone-veneer makers provide particularly formed L-shape part pieces. Corner rocks cost much more, however they're worth the convenience. Back-butter and set corners similar to regular rocks.