How to put up stone tile backsplash?

November 19, 2018
Do It Yourself Backsplash

Mesh-backed tiles range in size to 2 inches per individual tile..Mesh-backed tiles range in proportions as much as 2 inches per individual tile..

Mosaic tiles are often mounted on a mesh backer. This backer helps make installation easier; rather than mounting the tiles one-by-one, they can be put in in sheets roughly 12 inches in dimensions. These mesh-backed tiles are perfect for backsplash installations because mesh can easily be trimmed to assist fit the sheets into tiny areas, including the location beneath cupboards.

Gauge the backsplash area where in actuality the tiles are going to be installed. Mark off a location of the identical shape and size on the ground nearby. Construct the mesh sheets of tiles in this area to assist determine healthy and design.

Practice setting the sheets next to one another with also spacing to help keep the grout joints between the sheets despite having the bones within each sheet. Cut the mesh with scissors to cut the sheets to shape and remove tiles when it comes to areas where outlets tend to be installed. Cut anybody tiles to fit the edges regarding the installation with tile nippers.

Spread thinset mortar onto the backsplash wall surface with a trowel. Smooth out the grooves in the mortar with all the smooth edge of the trowel. This will help alleviate problems with extra mortar from approaching between your tiles during set up.

Hit the sheets of mosaic into the mortar in identical structure you determined on to the floor. Make use of the flat of one's hand to smooth each sheet in to the mortar regarding wall, going from base to top on sheet. Be careful not to press to tough. This may cause excess mortar ahead up involving the tiles.

Let the thinset dried out for 24 hours, after that grout the sheets. Scatter grout within the whole set up with a grout float presented at a 45-degree direction. Spread the grout from numerous guidelines across tiles to aid pack it to the numerous grout bones.

Allow the grout dried out for ten minutes, after that cleanse off the area for the tiles with a grout sponge. Lightly dampen the sponge and wipe the tiles in a circular motion. Rinse the sponge often to aid clean the tiles. Allow grout dry all day and night.

Things You Needs

  • Measuring tape
  • Scissors
  • Tile nippers
  • Thinset mortar
  • Trowel
  • Grout
  • Grout float
  • Grout sponge


  • If you should be setting up rock tiles, seal these with an impregnating sealer prior to grouting.
Share this Post